Tools and Supplies to Attach Carpet Binding Strips | ||||
---|---|---|---|---|
1 | Carpet Binding Machine | |||
2 | Binding Tape | |||
3 | Scissors | |||
4 | Measuring Tape | |||
5 | Straight Pins | |||
6 | Seam Roller | |||
7 | Utility Knife | |||
8 | Staple Gun | |||
9 | Staples | |||
10 | Hot Glue Gun | |||
11 | Glue Sticks | |||
12 | Rubber Mallet | |||
13 | Carpet Trimmer | |||
14 | Carpet Seam Iron | |||
15 | Knee Kicker |
Attaching carpet binding strips is a straightforward process that can be accomplished with a few simple steps. Here is a step-by-step guide to help you attach carpet binding strips like a professional:
Step 1: Prepare the Carpet
Before attaching the binding strips, make sure that the carpet is clean and free of any debris or dirt. If necessary, vacuum the carpet to remove any loose dirt or debris. Also, trim any loose fibers or threads from the edges of the carpet.
Step 2: Measure and Cut the Binding Strips
Measure the length of the edges of the carpet that you want to bind. Cut the binding strips to the appropriate length using a sharp pair of scissors or a utility knife. Make sure that the binding strips are slightly longer than the edges of the carpet.
Step 3: Position the Binding Strips
Lay the binding strips on the edges of the carpet, making sure that they are centered and straight. The binding strips should overlap the edges of the carpet by about 1/4 inch on each side.
Step 4: Apply Adhesive
Apply a thin line of adhesive along the edges of the carpet, underneath the binding strips. Make sure that the adhesive is evenly distributed and covers the entire length of the edges.
Step 5: Attach the Binding Strips
Press the binding strips firmly onto the adhesive, making sure that they are straight and even. Use a rolling pin or a similar tool to press the binding strips firmly onto the carpet. Make sure that the binding strips are securely attached to the carpet.
Step 6: Trim the Binding Strips
Trim the excess binding strips using a sharp pair of scissors or a utility knife. Make sure that the edges are straight and even.
Step 7: Finish the Binding
Fold the binding strips over the edges of the carpet and press them firmly onto the back of the carpet. Apply a small amount of adhesive to the back of the carpet to secure the binding strips in place.
In conclusion, attaching carpet binding strips is a simple process that can be done with a few basic tools and materials. By following these steps, you can easily attach binding strips to your carpet and give it a professional finish.