How to Bind Carpet With Iron

Binding a carpet with iron is a cost-effective and easy way to give your carpet a new lease of life. With a few simple steps, you can make your old carpet look brand new. Here is a step-by-step guide on how to bind carpet with iron.

Step 1: Measure the Carpet
The first step is to measure the carpet you want to bind. Measure the length and width of the carpet and add an extra 2 inches to each side to allow for the binding.

Step 2: Cut the Binding Tape
Cut the binding tape to the length and width of the carpet. The binding tape should be at least 2 inches wide to ensure that it covers the edges of the carpet.

Step 3: Fold the Binding Tape
Fold the binding tape in half lengthwise and iron it flat. This will create a crease down the center of the tape that will help you align it with the edge of the carpet.

Step 4: Apply Adhesive
Apply a small amount of adhesive to the edge of the carpet. Be sure to spread the adhesive evenly along the edge of the carpet.

Step 5: Attach the Binding Tape
Align the folded binding tape with the edge of the carpet and press it firmly onto the adhesive. Make sure the crease in the binding tape is aligned with the edge of the carpet.

Step 6: Iron the Binding Tape
Using a hot iron, press the binding tape onto the edge of the carpet. Be sure to apply even pressure and move the iron slowly along the length of the binding tape.

Step 7: Trim the Excess Binding Tape
Once the binding tape is securely attached to the carpet, trim the excess tape using a sharp pair of scissors. Be sure to cut the tape close to the edge of the carpet.

Step 8: Repeat the Process
Repeat the process on all sides of the carpet until all edges are bound.

In conclusion, binding a carpet with iron is an easy and cost-effective way to give your old carpet a new look. With a few simple steps, you can have a beautifully bound carpet that looks brand new. Just be sure to measure carefully, use a good adhesive, and take your time when ironing the binding tape onto the carpet.