How to Bind Carpet With an Edge Binder

Binding a carpet with an edge binder is a great way to finish the edges of your carpet and give it a professional look. Here are the steps you need to follow to bind a carpet with an edge binder:

Step 1: Measure the Carpet
Measure the carpet to determine the length of the binding tape you will need. Add an extra inch to the measurement to ensure that you have enough tape to work with.

Step 2: Cut the Binding Tape
Cut the binding tape to the length you measured in Step 1. Make sure to cut the tape straight and even.

Step 3: Apply the Binding Tape
Lay the binding tape on the edge of the carpet, making sure that the tape is centered and even. Use a hot glue gun to apply a small amount of glue to the edge of the carpet, then fold the binding tape over the edge and press it down firmly.

Step 4: Attach the Binding Tape
Continue to apply glue to the edge of the carpet and attach the binding tape, working your way around the entire edge of the carpet. Make sure to keep the binding tape centered and even as you work.

Step 5: Miter the Corners
When you reach a corner, use a pair of scissors to cut the binding tape at a 45-degree angle. Fold the tape over the corner, making sure that the angle is even and the tape is centered. Apply glue to the corner and press the tape down firmly.

Step 6: Finish the Binding
Once you have attached the binding tape to the entire edge of the carpet, fold the end of the tape under and apply glue to secure it in place. Trim any excess tape with scissors.

Step 7: Allow the Glue to Dry
Allow the glue to dry for at least 24 hours before using the carpet.

By following these steps, you can easily bind a carpet with an edge binder and give it a professional finish. With a little practice, you can achieve perfect results every time.